In a pandemic era, sanitisation has become a very important and pivotal part of our lives. With the Sensani we make sanitisation simple and fun. Using smart sensor technology coupled with infrared induction, we can dispense touch free sanitizer alcohol directly from the machine avoiding any form of cross contamination. Rechargeable via USB this offers a great wireless capability for an array of placements.
80 ml Isopropyl Alcohol Capacity
USB Rechargeable & Battery Operated
Compact & Portable
ANATOMY OF THE SENSANI
80 ml Isopropyl alcohol capacity
USB rechargeable battery operated
No complex settings
Dimension: (H) 90 mm (W) 55 mm
Net Weight: 0.21 kgs
Gross Weight: 0.28 kgs
Power: 2.5 w
Input Voltage: USB 5v
Charging Time: 3.5 hours
Standby Time: 24 hours
Alcohol Consumption per Diffusion: 0.18ml - 0.55ml
HOW SANITISATION WORKS
Sensani is a portable sanitiser/diffuser-style machine that turns Isopropyl Alcohol into a fine mist. The machine is contactless, touch-free and works when your hands are placed over the sensor.
Safe & efficient sterilization
Touch-free and non-contact
Wireless and portable
HOW TO SET IT UP
Step 1: When the power is off remove the atomiser head and unscrew the bottle.
Step 2: Remove the cap from the bottle and fill it with Isopropyl Alcohol.
Step 3: Insert the silicon plug firmly to the bottle and immerse the wick, allow the wick 10 seconds to absorb the Isopropyl Alcohol and then flip the wick so its fully absorbed.
Step 4: Screw the bottle to the atomiser head.
Step 5: Press the power button on the atomiser head to turn the power ON/OFF.
To clean and reuse your bottles, follow these steps: Step 1: Prepare a large tub and have a bath towel you can lay on your counter to soak up the water. Step 2: Unscrew the cap from the diffuser. Step 3: Soak the bottle in a tub of warm, soapy water for 10-15 minutes. Step 4: Put them in a new tub of warm water combined with a 1/2 cap of non-toxic cleaner and let it soak for 5-10 minutes. Step 5: Soak the bottle, rinse one last time and let it air dry on a towel until they are completely dry.
Unplug the machine immediately and discontinue use in the event of smoke or a burning smell
Do not wrap the adaptor with cloth, paper, or anything that may result to avoid abrasions, cuts, fraying, crimping, and kinking
Do not disassemble or attempt to self-repair the diffuser, this will void the warranty. Any damage caused by the user does not qualify for replacement by Hydur Fragrances
Disconnect the diffuser from power adaptor before refilling, cleaning or moving the diffuser
Clean the sensor with a rubbing alcohol-soaked cotton swab
Do not use metal objects to clean the sensor; use only a cotton swab or cloth dipped in isopropyl alcohol or a neutral detergent
Make sure to clean the unit before switching to different scenting oils
Avoid placing the machine in direct sunlight, close to a refrigerator or fan, or in a hot environment
When not in use, clean the diffuser and store dry at 0°C—50°C, 5%-95% humidity.
Why is the machine not working?
USB cable may not be properly plugged in or your diffuser ran out of battery
Check if the power is on or off and/or your machine is charged.
Check if there is Isopropyl Alcohol inside the bottle.
How do I know if the machine is fully charged?
The light indicator flashes repeatedly to indicate charging and will become solid white once its fully charged.